How to fix lights bar moisture(condensation)?

1: checking the temperature changing. from hot to cold will cause condensation.you can fix the issue by the moisture breather. that is why we recommend to purchase the lights bar with moisture breather. you can adjust the temperature balance via the moisture breather.

2:Avoiding the housing leak water. Usually the lights bar water proof rat should be IP67.68.69K

IP67: Protected against temporary immersion.

IP68: Protected against prolonged effects of immersion under pressure.

IP69k: Protected against high pressure, high temperature spray downs.

All Myoffroad light bars and pods are tested to IP68, 100% dust tight and protected against complete, continuous submersion in water. and seal with good quality silicon.

3: If unfortunately your lights bar without the moisture breather and warranty. you can open the housing try to dry the water by dryer then seal it with seal ring, ensure no gap to let the wet air get in.

At last,Hope this issue never happen to you. Lucky always with you.and here attach our warranty term for reference:

Mystery offroad LED Co ltd LED Fixtures

​Myoffroad led warrants that each of its LED lighting fixtures (the “Product(s)”) that are purchased while this Warranty is in effect will be free from defects in materials and workmanship for a period of 2 years from the original date of purchase from myoffroad Led or its authorized distributor/dealer effective March 1st, 2020. Below is list of the product which are covered under 2 years warranty.

1: Offroad lights bar mount brackets

2:Offroad led work lights

3:Offroad led lights bar

4:Offroad jeep bumper

If any more questions or doubts, welcome contact us for more details.

We treat each problems as the opportunity to show the quality after-sales service. No matter how big or small order you are.

Article Link